In order to give you a better service Tintometer uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

Copper

Copper
Copper and its salts are widely used in industry and there are strict controls on permitted levels of discharge in trade effluents. Test kit AF364 is designed for this application with a variable range of copper concentrations being covered. drinking water often contains dissolved Copper due to leaching from copper piping. Test kit AF266 is designed to monitor very low levels of Free Copper (Copper II) in potable water. In addition, Copper in the form of its soluble salts is toxic to many forms of aquatic life. It is essential that any supply water for aquaria be checked for Copper content. Copper based algicides are widely used and these are based on complexed Copper formulation. Tests for Total Copper are required to measure the true concentration of the element. A guide level of 3 mg/l has been advised by the EC drinking water directive.
Title Test Name Measuring Range Method No. Product Type Mark as favourite
Copper L 0.05 - 4 mg/l Cua)
  • M151
Photometer
Copper 50 T 0.05 - 1 mg/l Cua)
  • M149
Photometer
Copper T 0.05 - 5 mg/l Cua)
  • M150
Photometer
Copper-Test Strips 0.05 - 5 mg/l Cu Photometer
Test Kit
Copper 0.1 - 1 mg/l Cu Test Kit
Copper 0.5 - 5.0 mg/l Cu Test Kit
Copper HR T 0 - 4.0 mg/l Cu
  • M3062
Test Kit
Copper HR T 0 - 5 mg/l Cu
  • M2518
Test Kit
Copper LR T 0 - 1.0 mg/l Cu
  • M3061
Test Kit
Copper LR T 0 - 1 mg/l Cu**
  • M2520
Test Kit
Copper VLR T 0 - 1 mg/l Cu
  • M2517
Test Kit