In order to give you a better service Tintometer uses cookies. By continuing to browse the site you are agreeing to our use of cookies.

Copper, differentiated determination with Fluid reagent and Powder

0.05 - 4 mg/l Cua) Mark as favourite

Copper
Copper and its salts are widely used in industry and there are strict controls on permitted levels of discharge in trade effluents. Test kit AF364 is designed for this application with a variable range of copper concentrations being covered. drinking water often contains dissolved Copper due to leaching from copper piping. Test kit AF266 is designed to monitor very low levels of Free Copper (Copper II) in potable water. In addition, Copper in the form of its soluble salts is toxic to many forms of aquatic life. It is essential that any supply water for aquaria be checked for Copper content. Copper based algicides are widely used and these are based on complexed Copper formulation. Tests for Total Copper are required to measure the true concentration of the element. A guide level of 3 mg/l has been advised by the EC drinking water directive.

Applications

  • Boiler Water
  • Cooling Water
  • Drinking Water Treatment
  • Galvanization
  • Pool Water Control
  • Pool Water Treatment
  • Waste Water Treatment
Product finder
Title Packaging Unit Part Number Mark as favourite
Copper Reagent Set 1 pc. 56R023355
Title Online Download Type Format Language Direct Download
Instruction Manual Single Method Copper L Instruction Manual PDF (2.64 MB)