Single unit construction with no parts to lose or break
Large, easy to read display
Industry specific parameter combinations available
The Lovibond® MD 100 6in1 Pool Photometer is a multi-parameter instrument which allows for fast and easy measurement of pool water quality. Six key parameters can be measured utilizing tablet reagents. Ideal for poolside testing, the MD 100 comes ready to use with all of the reagents and accessories required for testing.
Drinking Water Treatment
Pool Water Control
Pool Water Treatment
Raw Water Treatment
Waste Water Treatment
The MD 100 has several key features that make it a favorite among users.
Waterproof Design The IP 68 design of this instrument ensures that the MD 100 remains water tight for up to 1 hour at 0.1 meter. Don't worry about dropping the instrument into a body of water - it floats!
Accurate, Reproducible Results The optical system of the MD 100 utilizes LEDs and interference filters which quickly gives you results that you can be confident in.
User Calibration Mode A one-point calibration is possible. Additionally, all MD 100 instruments have the ability to display readings directly in ABS or %T units.
One-time-Zero Function Don't waste time waiting for your instrument to Zero after each test. When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument.
Automatic Data Storage with Transfer Capabilities The MD 100 automatically stores the last 16 readings with time and date stamp. These results can be transferred to a spreadsheet using the IRiM accessory.
Ergonomic Design Whether you're using the MD 100 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display. If you're using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench.
Factory Programmed All MD 100 instruments are supplied ready to use with up to 14 calibration curves. All you need to do is select the test you need, prepare your sample and test!
Scroll Driven Menu System The simple interface allows you to quickly reach the test you need. When the instrument is turned on, it will automatically display the last test used.
LEDs, interference filters (IF) and photo sensor in transparent sample chamber. Depending on the version, up to 3 different interference filters are used. Wavelength specifications of interference filters: 430 nm Δλ = 5 nm 530 nm Δλ = 5 nm 560 nm Δλ = 5 nm 580 nm Δλ = 5 nm 610 nm Δλ = 6 nm 660 nm Δλ = 5 nm
-2600 - 2600 mAbs
3 % FS (T = 20 °C – 25 °C)
backlit LCD (on keypress)
Round Cuvettes 24 mm
factory calibration and user calibration. Reset to factory calibration possible