Con la intención de darle un mejor servicio Tintometer utiliza cookies. Al seguir em la web se está de acuerdo con nuestro uso de cookies.

Kit de análisis de líquidos de corte

For the standard situation in water testing

Agregar al carrito de cotizaciones

Part Number 56K021401


  • Ensures compliance to regional Health and Safety at Work Procedures
  • Optimises cutting fluid performance
  • Safely controls microbiological contamination
  • Optimised for accurate trend analysis


  • Agua de caldera
  • Agua de refrigeración
  • Control de aguas de piscina
  • Tratamiento de aguas de piscina
  • Tratamiento de aguas potables
  • Tratamiento de aguas residuales

Cutting fluids are required in metal machining to improve tool life, reduce work piece thermal deformation, enhance surface finish and to flush chips from the cutting zone. These fluids degrade with time due to bacterial growth and contamination with tramp oil.

Testing is essential since health risks exist for lathe operators by both fluid contact (dermatitis) and breathing of the mist/vapour (asthma, extrinsic allergic alveolitis and other breathing problems).

Biocidal additives improve the life of the fluid and reduce the hazard to health. On-going monitoring, inspection and maintenance are required in the UK as part of an employer’s obligation under Section 2 of the Health and Safety at Work Act 1974. Similar work related mandates are in force across Europe.

Lovibond® test kits measure the key parameters necessary to optimise cutting fluid performance and enable enumeration and safe control of microbiological contamination. The basic kit is supplied with tests for cutting fluid concentration (refractometer), pH, water hardness, Nitrite/Nitrate and dipslides for monitoring microbiological activity. A deluxe version, incorporating the DI 10 dipslide incubator is also available. A uniform incubation temperature for dipslides allows accurate microbiological trend analysis month on month.

Parámetros de prueba Rango de medición Número del método
Brix 0 - 18 %
Hardness 0 - 500 mg/l CaCO3
Nitrate/Nitrite 1 - 80 mg/l NO2 -
pH 0 - 14

Tiras reactivas para nitrato/nitrito

10 - 500 mg/l NO3 -
Título Rango de medición Unidad de embalaje Referencia No Agregar al carrito de cotizaciones
Dureza, total tiras 40 - 1000 mg/l CaCO3 1 Cantidad 56S000950
Tiras nitrato/nitrito 10-500/1-80 10 - 500 mg/l NO3 - ; 1 - 80 mg/l NO2 - 1 Cantidad 56S001890
Título Online Download Type Format Idioma Descarga directa
Hoja de datos 56K021401 - Kit de análisis de líquidos de corte Hoja de datos PDF (0.20 MB)
Instrucciones SD 50 Instruction Manual PDF (0.55 MB)
  • Medidor de pH SD 50
  • Cultivos laminares Combi / RBS
  • Tiras reactivas dureza
  • Tiras reactivas nitrito/nitrato
  • Refractómetro Brix