Cooling Water Weekly Test Kit
For regular monitoring of cooling water
- Monitor parameters quickly, safely and accurately
- Ensures optimum output and efficiency
- Control correct levels and dosing
- Easy, daily analysis
All cooling systems work on the same principle: Water is circulated by a pump through a pipe system to remove excess heat. No matter whether it is an open or closed system: Water is always lost, new water must be added. So chemical changes occur or microorganisms and deposits form. There are therefore certain parameters that should be checked regularly in order to avoid problems and extend the life of the systems.
N. ordine 56K701100
Applicazioni
- Acqua di raffreddamento
Prodotti correlati
Informazioni sul prodotto
The Test Kit contains all equipment and test reagents required to optimise treatments and regularly monitor critical control parameters quickly, safely and accurately, ensuring optimum output and efficiency.
The Lovibond® Cooling Weekly Test Kit is designed for use on cooling towers and many types of closed water systems such as chilled water circuits and heating systems.
The kit will enable end users to complete tests in between engineers visits. It should be used to monitor water conditions to ensure that the systems are under control and do not exhibit signs of corrosion, scaling or microbiological fouling.
| Parametri di prova | Campo di misura | Numero metodo | Metodo chimico |
|---|---|---|---|
| Bromo T | 0 - 5 mg/L Br2 | M2504 | DPD |
| Conduttività | 0 - 20 mS/cm | SD / Con | |
| Durezza totale | 5 - 600 mg/L CaCO3 | 56I700280 | |
| Hardness | 5 - 600 mg/L CaCO3 | 56I700270 | |
| pH | 0 - 14 | SD / pH |
| Titolo | Parametro e campo | Classificazione disco colorimetrico | N. ordine | Aggiungi al carrello |
|---|---|---|---|---|
| CHECKIT® Disc Bromo | Bromo T 0 - 5 mg/L Br2 | 0 / 0,2 / 0,4 / 0,6 / 0,8 / 1,0 / 1,2 / 1,4 / 1,6 / 1,8 / 2 / 2,5 / 3 / 3,5 / 4 / 4,5 / 5 | 146280 |
| Titolo | Campo di misura | Metodo chimico | Unità di imballaggio | N. ordine | Aggiungi al carrello |
|---|---|---|---|---|---|
| Tampone di durezza del calcio CH2 | 5 - 600 mg/L CaCO3 | 65 mL | 56L014465 |
|
|
| KP216- CH1P Indicatore di durezza calcica | 5 - 600 mg/L CaCO3 | Polvere / 20 g | 56P021620 |
|
|
| KS162-TH3-Titolante durezza LR 65 ml | 5 - 600 mg/L CaCO3 | 65 mL | 56L016265 |
|
|
| KS145-H-TH3-CH3-Titolante durezza HR 65 ml | 5 - 600 mg/L CaCO3 | 65 mL | 56L014565 |
|
|
| Hardness Total Indicator TH1P | 5 - 600 mg/L CaCO3 | Polvere / 40 g | 56P028340 |
|
|
| Tampone durezza totale TH2 | 5 - 600 mg/L CaCO3 | 65 mL | 56L016065 |
|
|
| DPD No. 1 Rapido | 0 - 5 mg/L Br2 | DPD | Pastiglia / 100 | 511310BT |
|
| DPD No. 1 Rapido | 0 - 5 mg/L Br2 | DPD | Pastiglia / 250 | 511311BT |
|
| DPD No. 1 Rapido | 0 - 5 mg/L Br2 | DPD | Pastiglia / 500 | 511312BT |
|
| Titolo | N. ordine | Aggiungi al carrello |
|---|---|---|
| Siringa, plastica, 20 mL | 56A006501 |
|
| Vaso di titolazione con coperchio, plastica, 60 mL | 56A006701 |
|
| CHECKIT® Comparator | 145000 |
|
- Plastic case
- SD40 Multi Pocket Tester
- Checkit Comparator
- Checkit Disc Bromine
- Syringe plastic, 20 mL
- Titration jar with cap, plastic, 60 mL
- 2 plastic vials 10mL with lid
- 100 DPD No. 1 Rapid
- Hardness Total Buffer TH2
- Hardness LR Titrant TH3
- Hardness HR Titrant TH4
- Hardness Total Indicator TH1P
- Calcium Hardness Indicator CH1P
- Calcium Hardness Buffer CH2
- pH Buffer 4
- pH Buffer 7
- pH Buffer 10
- 1413 µS Standard Conductivity Solution
- Instruction manual