Disinfection Test Kits

For disinfection control in commercial buildings

  • On-site testing before and after disinfection works
  • Monitoring the correct concentration for your system
  • Determination of pH, Chlorine & more disinfection parameters
  • Complete kit for economic & fast results

Lovibond® Disinfection Kits can support you with on-site microbiological testing before and after remedial disinfection works:

  • Chlorine and peroxide based Test Kits to monitor concentration of active disinfectant
  • Disinfectant tests to ensure that you have the correct concentration for your system - effective kill without corrosion.
  • A range of test strips to economically monitor the pull through of disinfectant solutions to all parts of the system
    • Our range of Kits is adapted to your special needs and allows accurate measurements.

     

    Aplicaciones

    • Agua de refrigeración
    • Control de desinfección
    Título Parámetro y rango Referencia No Agregar al carrito de cotizaciones
    Disinfection Chlorine Test Kit
    The complete equipment for professionals to control all important disinfection parameters including Legionella. Avoid midosing material damage.
    		Cloro (libre) 1 - 300 mg/L Cl2 Colours may vary depending on sample and test conditions.
    Cloro HR 10 - 200 mg/L Cl2
    pH 7 - 14 pH     		56K701130
    Disinfection Chlorine Dioxide Test Kit
    Monitor the reliable disinfection prevention effect especially against Legionella. Simple for use for technical non-technical operators.
    		Chlorine Dioxide 0.16 - 600 mg/L ClO2
    pH 0 - 14 pH     		56K701140
    Disinfection Hydrogen Peroxide Test Kit
    Get the whole equipment to monitor the concentration of hydrogen peroxide as disinfectant and biozide. Avoid Legionella and infestation with biofilm.
    		Hydrogen Peroxide 15 - 500 mg/L H2O2
    Hydrogen Peroxide test strips 0.5 - 100 mg/L H2O2
    pH 7 - 14 pH     		56K701150
    Disinfection Test Kit (combined)
    For use in all major applications for the control of disinfection: From chlorine and chlorine dioxide to hydrogen peroxide, compliant with regulations.
    		Chlorine Dioxide 0.16 - 600 mg/L ClO2
    Cloro (libre) 1 - 300 mg/L Cl2 Colours may vary depending on sample and test conditions.
    Cloro HR 10 - 200 mg/L Cl2
    Hydrogen Peroxide 15 - 500 mg/L H2O2
    Hydrogen Peroxide test strips 0.5 - 100 mg/L H2O2
    pH 7 - 14 pH     		56K701160
    Título Online Download Type Format Idioma Descarga directa
    Leaflet Disinfection Test Kit Leaflets PDF (2.98 MB)
    Brochure Industrial Water Monitoring Leaflets PDF (1.40 MB)