Disinfection Chlorine Dioxide Test Kit
Determination of chlorine dioxide for disinfection
- On-site testing before and after disinfection works
- Non DPD method for the determination of chlorine dioxide
- For control in the treatment of microorganisms
- Simple for use by both technical and non-technical operators
For commercial buildings, especially dormant premises, industry organisations recommend in many countries regular maintenance procedures for hot & cold-water services to prevent infection with bacteria, biofilms & material damage through misdosing.
The Lovibond® Disinfection Chlorine Dioxide Test Kit assists you with testing instruments and reagents for monitoring the correct dosing level.
Chlorine dioxide is stronger than chlorine and guarantees to reach outlying corners of branches water systems even for Legionella prevention.
Part Number 56K701140
Aplicaciones
- Agua de refrigeración
- Control de desinfección
Información sobre el producto
Chlorine dioxide (ClO2) kills microorganisms in the water and has a stronger disinfection effect against germs, viruses, bacteria, fungi and algae than the most commonly used chlorine. Legionella are also reliably removed.
In addition, there is the gradual degradation effect on the biofilm as a breeding ground for legionella even at low doses.
The disinfection effect of chlorine dioxide is also almost independent of the pH value. It does not form chloramines and is largely odourless and tasteless.
Parámetros de prueba | Rango de medición | Número del método | Método químico |
---|---|---|---|
Chlorine Dioxide | 0.16 - 600 mg/L ClO2 | 56I700230 | |
pH | 0 - 14 pH | Strips pH 0-14 |
Título | Rango de medición | Unidad de embalaje | Referencia No | Agregar al carrito de cotizaciones |
---|---|---|---|---|
Tampón dióxido de cloro CD01 | 0.16 - 600 mg/L ClO2 | 65 mL | 56L033965 |
|
Chlorine Dioxide Titrant CDO2 | 0.16 - 600 mg/L ClO2 | 65 mL | 56L150265 |
|
Titrante de dióxido de cloro CD02A | 0.16 - 600 mg/L ClO2 | 65 mL | 56L150165 |
|
KS1500-CD03-Dióxido de cloro HR 0,42% | 0.16 - 600 mg/L ClO2 | 65 mL | 56L150065 |
|
Tiras de ph de plástico pH 0-14 | 0 - 14 pH | 1 Cantidad | 56S001290 |
|
Título | Referencia No | Agregar al carrito de cotizaciones |
---|---|---|
Jeringuilla, plástico, 20 mL | 56A006501 |
|
Recipiente de valoración con tapa, plástico, 250 mL | 56A010501 |
|
- Plastic case
- pH Test Strips, pH 7-14, plastic
- Chlorine Dioxide Buffer CDO1
- Chlorine Dioxide Titrant CDO2
- Chlorine Dioxide Titrant CDO3
- Syringe, plastic, 20 mL
- 2 Titration jars with cap, plastic, 60 mL
- Instruction manual