BD 600

The BD 600 is the ideal system for process control or as a secondary test to the Dilution Method. Using a respirometric system solves many of the issues associated with the dilution method for BOD analysis.

• Significantly Reduced Sample Preparation
  It's easy to begin collecting data - simply add sample to the bottle, add nitrification inhibitor and place the sensor head on the bottle. There is no need for sample dilutions or seeding the sample. Because this is a respirometric test, concerns regarding air in the sample are eliminated.
• Operators do not have to be present at completion of test
  Measurements are automatically taken and stored at regular time intervals and can be recalled at your convenience - no more weekend trips to the lab or plant!  
• Easy and quick interpretation of measurement values
  In addition to displaying results of a sample directly in mg/l BOD, the large, integrated, display is able to display the BOD curve which makes it is easy to see and understand measurement data points and trends. In addition, each sensor head has an integrated LED. This allows operators to visually confirm which sample the data is being displayed for and reduces potential confusion or errors over which sample data is presented
• Consistent Measurement Conditions
  The Automatic Start Function ensures all measurements are taken at an equal sample temperature. When the measurement conditions are consistent across readings, operators do not have to work about temperature or pressure fluctuations skewing results.
• Sample Identification and Tracking
  The BD 600 interface, makes it easy to assign an identification code or sample name when setting up a new sample. This helps track a sample from the time it is collected and ensures traceability during sample measurement.  
• Use the remote control
  If using an incubator with a glass door, operators can use the supplied remote control to display measurement data for a sample - without even opening the door! This further ensures that samples stay at a consistent temperature which is essential to accurate results.

• BD 600 with 6 sensor heads,
• Control unit with batteries,
• Power supply unit incl. Y-cable for common power supply of BD 600 and stirring unit
• Inductive stirring unit
• Incl. standard accessory consists of:
  • 6 Sample bottles
  • 6 Rubber gaskets
  • 6 Magnetic stirring rods
  • 50 ml potassium hydroxide solution 45%
  • 50 ml nitrification inhibitor solution
  • 1 Overflow measuring flask 157 ml
  • 1 Overflow measuring flask 428 ml
  • 1 Remote control
  • Manual
  • Guarantee sheet
  • 100 - 240 V / 50 - 60 Hz