Cutting Fluid Test Kit

For the optimal effectiveness of cutting fluids

  • Ensures compliance to regional Health and Safety at Work Procedures
  • Optimises cutting fluid performance
  • Safely controls microbiological contamination
  • Optimised for accurate trend analysis

Numéro d'ordre 56K701180

1 Pièces

Ajouter au panier de citations

Applications

  • Contrôle de la désinfection
  • Eau de refroidissement

Informations sur les produits

Cutting fluids are required in metal machining to improve tool life, reduce work piece thermal deformation, enhance surface finish and to flush chips from the cutting zone. These fluids degrade with time due to bacterial growth and contamination with tramp oil.

Testing is essential since health risks exist for lathe operators by both fluid contact (dermatitis) and breathing of the mist/vapour (asthma, extrinsic allergic alveolitis and other breathing problems).

Biocidal additives improve the life of the fluid and reduce the hazard to health. On-going monitoring, inspection and maintenance are required in the UK as part of an employer’s obligation under Section 2 of the Health and Safety at Work Act 1974. Similar work related mandates are in force across Europe.

Lovibond® test kits measure the key parameters necessary to optimise cutting fluid performance and enable enumeration and safe control of microbiological contamination. The basic kit is supplied with tests for cutting fluid concentration (refractometer), pH, water hardness, Nitrite/Nitrate and dipslides for monitoring microbiological activity. A deluxe version, incorporating the DI 10 dipslide incubator is also available. A uniform incubation temperature for dipslides allows accurate microbiological trend analysis month on month.

Paramètres de test Gamme de mesure N° méthode Méthode chimique

Comptage total / Levures et moisissures

 D003 TTC/Rose
Glycol % PEG/MEG Glycol/Refractometer
Nitrate/Nitrite 1 - 80 mg/L NO2 - Strips Nitrate/Nitrite
pH 0 - 14 SD / pH
pH 7 - 14 pH Strips pH 7-14
Titre Gamme de mesure Pack contenant Code Ajouter au panier de citations
Bandelettes pH 7-14 plastique 7 - 14 pH 1 Pièces 56S001190
Titre Code Ajouter au panier de citations
D003 TTC/RBS Dipslides (rose bengale) 56B010310
Récipient de titrage avec couvercle, plastique, 60 mL 56A006701
Seringue, plastique, 20 mL 56A006501
Solution tampon KS6-pH 4 65 ml 56L000665
Solution tampon KS9-pH 7 65 ml 56L000965
Solution tampon KS3-pH 10 65 ml 56L000365
Titre Online Download Type Format La langue Téléchargement direct
Fiche technique 56K701180 - Cutting Fluid Test Kit Fiche technique PDF (0.20 MB)
Brochure Surveillance des eaux industrielles Leaflets PDF (1.40 MB)
Mode d'emploi Manuel de méthodes PDF (9.86 MB)
Instruction Manual Single Method Strips pH 7-14 - pH Instruction Manual PDF (0.54 MB)
  • Plastic case
  • SD40 Multi Pocket Tester
  • Syringe plastic, 20 mL
  • 2 Titration jars with cap, plastic, 60 mL
  • Glycol Refractometer
  • D003 TTC/RBS Dipslides (Rose Bengal)
  • pH Buffer 4
  • pH Buffer 7
  • pH Buffer 10
  • pH Test Strips, pH 7-14, plastic
  • Nitrate/Nitrite Test Strips, 10-500/1-80 mg/L
  • Instruction manual
Titre SDS Country Téléchargement direct
pH Buffer 10
pH Buffer 4
pH Buffer 7