
The limit of detection is an important specification for low-level process turbidity monitoring.

Bubbles are caused by an outgassing of the sample. These are preventable!

If you don‘t properly control for it, it can create a positive interference. There are several ways to mitigate this risk.

With a laser turbidimeter you can see turbidity spikes faster and prevent filter breakthrough.

Learn about the benefits of different light sources from a leading turbidity expert. You'll learn which light source is best suited for what you're trying to achieve with your turbidity measurements.

LED light sources contribute to better process turbidity measurements.

The PTV Series of Process Turbidimeters solves the little things that make a big difference. From installation and setup; daily measurement and control; routine procedures such as calibration, verification and maintenance; to data collection and management. Our goal is to save you time and ensure accuracy.